Why is roadshow internet different from a one-off event?
A single event gives you time to survey the venue, test the connection and fix problems before the day. A touring activation, product roadshow, recruitment drive or community information tour does not. Typical differences:
- Short setup windows. Crews often have an hour or two between arriving and opening.
- Different site types. One week can include a shopping centre court, a regional showground, a car park and a council hall, each with different coverage and power.
- Rotating staff. The person setting up in week three may not be the person who planned the network.
- Repeated risk. A weak point in the kit, such as a single connection type, fails again at every stop where coverage is poor.
The goal is a network that any trained crew member can set up the same way in under 30 minutes, with known results at each stop.
How do you check coverage for each stop?
Mobile coverage is usually the main internet source on a tour, so check it town by town before the schedule is locked:
- Read the providers' coverage maps. Under the ACMA's mobile network coverage maps standard, providers show 4G and 5G coverage as good, moderate, basic or no coverage. Basic means an adequate experience with occasional disruptions, which is a warning sign for card payments or a live stream.
- Remember what the maps cover. The ACMA says the maps are predictions that give general guidance only and do not apply indoors or in a vehicle. A shopping centre or a steel-roofed hall can be much weaker than the outdoor map suggests.
- Check close to the date. Providers must review their maps at least once every three months, so a check made when the tour was first planned may be out of date.
- Ask the venue. Local staff usually know which corners have poor reception and whether venue WiFi is open to hirers.
- Test on arrival. Run an upload and download test at the actual setup spot, at a similar time of day to the event.
The Australian Government's telco tips for small businesses make the same point that applies to tours: plan ahead and do not rely on a single technology. Our guide to mobile hotspots versus event WiFi explains why a phone hotspot is rarely enough.
What belongs in a standard roadshow network kit?
A good touring kit is the same at every stop, labelled, and packed in the order it is set up:
- Primary 4G/5G router with mounts for external antennas, so it can be placed where the signal is strongest rather than where the table is. See 4G and 5G router hire.
- Second internet link on a different mobile network, set up for automatic failover. Where a venue offers a wired connection, it can become a third option.
- WiFi access points for the stand or marquee. One access point handles roughly 50 active devices and about 900 m² of open area, so most stands need one or two. Larger footprints may suit a mesh WiFi kit.
- A small switch, labelled cables and spare power leads, so wired devices such as a presenter laptop or a printer are not left on WiFi.
- A printed setup card with network names, the order of steps and who to call if a test fails.
Keep the same network names and passwords on every stop so staff devices reconnect automatically. Do not add mobile signal boosters to the kit: the ACMA states that boosters are illegal in Australia and that a mobile repeater can only be used with written permission from a carrier.
How much bandwidth does each stop need?
Size the connection for the busiest moment at a typical stop. The planning figures we use:
| Use | Planning figure |
|---|---|
| Staff devices | 1.5 to 2 devices per staff member |
| Public guest WiFi | Up to about 1 device per person present |
| Video call or remote presenter | About 1.5 Mbps each way per call |
| Live stream | 10 to 20 Mbps stable upload per stream, plus 1.5 to 2 times headroom |
| Access point capacity | About 50 active devices per access point |
Example: a stand with six staff, two lead-capture tablets, two card terminals and one short daily live stream has about 16 devices. The stream drives the requirement, so plan for at least 20 to 40 Mbps of reliable upload at that stop. If the coverage check suggests that is not possible, move the stream to a stop with better coverage or record and upload later. The bandwidth calculator can help with other combinations.
How do you keep payments and lead capture working?
Sales, donations and sign-ups are often the reason for the tour, so protect them first:
- Put payments on their own network. Card terminals should not share WiFi with the public or with a live stream. Our EFTPOS payment networks page explains the setup.
- Know the offline behaviour. business.gov.au notes that EFTPOS and other electronic payment systems need electricity and an internet connection, and that some can work offline while others cannot. Check with your payment provider before the tour.
- Make lead capture work offline. Choose forms or apps that store entries on the device and sync later, so a short outage does not lose sign-ups.
- Secure the kit. The Australian Cyber Security Centre advises locking WiFi with WPA2 or WPA3, avoiding default passwords and installing firmware updates promptly. Update the kit between legs, not on the morning of a stop.
What does a repeatable setup checklist look like?
- Place the routers where the signal is strongest, ideally high and away from metal.
- Power on and confirm both internet links show a connection.
- Run a speed test on each link and write down the results.
- Mount access points above head height with a clear view of the stand.
- Connect wired devices: presenter laptop, printer, streaming encoder.
- Join a test device to each network: staff, guest and payments.
- Process a test transaction on each card terminal.
- Unplug the primary link for a minute to confirm failover works.
- Photograph the setup and log any issues for the next crew.
A short log of speed results and issues for each stop builds a useful record for the next tour and shows which towns need extra planning.
When should you get help with a tour network?
Help is worth considering when the tour has many stops, includes live streams or high sales volumes, or visits regional towns where coverage is basic. If you send the tour schedule and the list of venues, we can review coverage for each stop, suggest a standard kit and set it up so crews can run it. Our temporary internet and brand activation WiFi pages describe the options.
Questions people ask
Can a roadshow rely on one mobile router?
It is risky. Coverage changes from town to town, and a single router or network becomes a single point of failure at every stop. A second link on a different network with automatic failover is the usual approach.
Are mobile coverage maps accurate enough to plan a tour?
They are a useful starting point, but the ACMA describes them as predictions that give general guidance only. They do not apply indoors or in vehicles, so test at each venue on arrival.
Can we use a mobile signal booster at weak sites?
No. The ACMA states that mobile phone boosters are illegal in Australia. A mobile repeater can only be used with written permission from a carrier.
How long should network setup take at each stop?
With a standard, labelled kit and a checklist, a trained crew member can usually set up and test a stand network in around 30 minutes. Allow more time at a new site type.
Should card terminals use the guest WiFi?
No. Put card terminals on a separate payments network so guest traffic or a live stream cannot slow transactions, and check how the terminals behave offline.
Sources
- ACMA: Mobile network coverage maps standard
- ACMA: New rules for mobile phone coverage maps (March 2026)
- ACMA: Mobile repeaters, you need permission
- Australian Government, Department of Infrastructure: Telco tips for small businesses
- business.gov.au: Choose payment methods
- Australian Cyber Security Centre: Secure your Wi-Fi and router
Event dates, prices and product details can change. Check the organiser or manufacturer before you plan around them. Planning figures are starting points; every network is confirmed against the actual site.